home *** CD-ROM | disk | FTP | other *** search
-
- Parts List for the Single Channel Data Logger/Transient Recorder.
- -----------------------------------------------------------------
-
- 1) R1............................. 10 KilOhms, 1/4 Watt Resistor.
- 2) R2............................. 2.7 KilOhms, 1/4 Watt Resistor.
- 3) R3............................. 390 Ohms 1/2 Watt Resistor.
- 4) C1............................. 0.01uF Capacitor, greater than 25
- Volts DC working.
- 5) C2 & C3........................ 10uF Electrolytic Capacitor, greater
- than 10 Volts working, axial lead
- type.
- 6) Q1, Q2 & Q3.................... BC179 or any small signal silicon PNP
- Transistor.
- 7) ZD1............................ 5.6 Volt Zener.
- 8) SK1............................ PHONO/RCA Socket.
- 9) PL1............................ PHONO/RCA Plug.
- 10) BY1............................ PP3 Battery.
- 11) SW1............................ Single Pole ON/OFF Switch.
- 12) PP3 Battery Clip.
- 13) Various Coloured Wire.
- 14) Stripboard or Veroboard.
- 15) Suitable Box. Any type.
- 16) Hardware as required.
- 17) Sleeving if required.
- 18) Audio Coaxial Cable as required.
-
- ----------------------------------------------------------------------------
-
- Notes:-
- -------
-
- 1) All tolerances are + or - 10% or better.
- 2) All of the parts can be sourced from any Supplier.
-
- ----------------------------------------------------------------------------
-
- Mr Barry Walker,
- 70 King George Road,
- Loughborough,
- Leicestershire,
- LE11 2PA,
- England.
-
- Email to:-
-
- wisecracker@tesco.net
-
- BYE.....
-
- ============================================================================
-